Lithofin FLECKSTOP >W< – Water-Based Impregnation for Natural Stone & Tiles 1 Liter

Lithofin FLECKSTOP >W< – Water-Based Impregnation for Natural Stone & Tiles

Eco-friendly stain protection for absorbent surfaces

Lithofin FLECKSTOP >W< is a water-based, solvent-free impregnating sealer for natural stone, concrete stone, and absorbent tiles. Its advanced formula provides reliable protection against water, oil, and grease while preserving the natural appearance of the surface.

🔹 Properties & Benefits

• Water-based impregnation (solvent-free)
  
• Effective protection against oil, grease, and water stains
  
• Reduces surface absorbency
  
• Stains remain on the surface and can be easily removed
  
• Invisible protection – no surface film or coating
  
• Low odor and environmentally friendly
  
• Suitable for indoor and outdoor use
  

🔹 Applications

Ideal for:

• Kitchens and dining areas
  
• Countertops, tables, and window sills
  
• Floors and wall surfaces
  

Suitable for:

• Natural stone (e.g. granite, limestone, sandstone)
  
• Concrete stone
  
• Cotto & terracotta
  
• Absorbent, unglazed tiles
  

👉 Especially suitable for crackle (craquelé) tiles, as the impregnation penetrates deeply into fine cracks and provides effective stain protection.

🔹 How It Works

The product penetrates deep into pores and fine structures, forming an invisible protective layer within the capillaries.

• Water, oil, and grease cannot penetrate
  
• Dirt remains on the surface
  
• Natural appearance is preserved (slight color enhancement possible)
  

🔹 Application Instructions

• Surface must be clean, dry, and absorbent
  
• Apply evenly and generously
  
• Remove excess product completely before drying
  
• Walkable after approx. 20–30 minutes
  
• Full effectiveness after approx. 48 hours
  

💡 Important: Do not allow excess product to dry on the surface

🔹 Coverage

Depending on the surface:

• Sandstone: from approx. 7 m²/liter
  
• Rough concrete stone: approx. 10 m²/liter
  
• Polished natural stone: up to 20 m²/liter
  

🔹 Technical Data

• pH value: approx. 4.5
  
• Density: approx. 1.0 g/cm³
  
• Appearance: clear, slightly yellowish liquid
  
• Odor: nearly odorless
  

🔹 Durability

• Protection lasts up to 4 years (depending on use and surface)
  
• Heavily used areas should be treated regularly
  

🔹 Notes

• Only suitable for absorbent surfaces
  
• Suitability for polished marble and porcelain tiles must be tested in advance
  
• Limited effectiveness on dense or glazed surfaces
  
• Always perform a test on an inconspicuous area
  
• Remove splashes on sensitive materials immediately
  

🔹 Environment & Storage

• Solvent-free and environmentally friendly
  
• Packaging made of recyclable polyethylene (PE)
  
• Shelf life: up to 3 years (frost-free, cool, and sealed storage)